chamberlain liftmaster professional 12 hp program keypad

#Chamberlain liftmaster professional 12 hp program keypad code

To find the receiver look for the floppy antenna wire.

Match the dip switch settings with the settings on your existing remote or the receiver on the ceiling in the garage.

Slide open the bottom front of the universal remote shwon to expose the dip swithes and program button.

Models 375LM and 375UT Universal Remotes Programming Instructions for dip switch remotes.

#Chamberlain liftmaster professional 12 hp program keypad code

Release and press again to test.ģ90 MHz Security + (Red/Orange Learn Button)ģ90 MHz Billion Code (Green Learn Button) Press and hold down on the remote control button programmed in Step 2 until the garage door opener lights blink, or 2 clicks are heard, or for 4 seconds.Go to the garage door motor head and press the “Smart” button.Exit the remote programming by pressing and releasing any button other than the one you’re programming on the remote.Press and release the remote control button you with to use the number of times corresponding “Smart” button color on your garage door opener based on the chart below in Chart B:.Press and hold the program button on the hand held remote until the LED on the front of the remote turns on.Programming the 890MAX and 893MAX Remotes

Release the remote button and test by pressing again to activate the door.

While the indicator light is glowing, press and hold the remote button until the lights on the motor head blink or you hear 2 clicks.

Learn buttons are located on the motor head near the terminal strip for wire connections.

The Smart button indicator light will glow steady for 30 seconds. Press and release the square colored “Smart” button on your garage door opener motor head in the garage.Programming 971LM and 972LM, 371LM and 373LM Security + Transmitter